Page 10 of 13
Fork Damper Bitubo Pair SUA27486 Fits V65 GT, V75 4 valve, 750T Pair of Bitubo fork dampers Sorry, this part is no longer available. 27526485-z 27526485 GU27526485 27 52 64 85 2752 6485 2752.6485 27.52.64.85 Sorry this item is out of production Fork Seal Kit Ohlins SUA81976 Fits V11 Coppa Italia, V11 Scura, V11 Scura R, V11 Rosso Corsa, V11 Nero Corsa, V11 Cafe Sport, MGS-01 Dimensions: 43mm ID, 55mm OD Fork seal kit containing 2 x fork seals for Ohlins forks This part is available by special order, request a quote £26.50 INC VAT £22.08 EX VAT FAC Fork Damper Pair SUA29024 Fits Le Mans 1000 (1984-1987) Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs. For 16" wheel models Stainless steel damper rod and alloy top nut, supplied with fork top O ring.
Replaces Guzzi ref. 2952360 and 29526460. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil) This part is available by special order, request a quote £295.00 INC VAT £245.83 EX VAT Fork Dust Seal SUA81824 Fits Griso ALL Dimensions: 45mm ID Fork dust cover This part is available by special order, request a quote AP8123824 Also fits Aprilia RSV 2 1000, Aprilia, RSV 4 1000,
Aprilia SL FALCO 1000,
Aprilia TUONO 1000 £28.80 INC VAT £24.00 EX VAT Fork Stanchion Marzocchi SUA32410 Fits Breva 750, V7 Classic, V7 Special, V7 Cafe, V7 Racer, Nevada 750 Classic (2004-2008) Dimensions: 40mm OD Chromed fork stanchion for Marzocchi fork Use fork seal SUA27584 with this stanchion This part is available by special order, request a quote 32525410 GU32525410 32 52 54 10 3252 5410 3252.5410 32.52.54.10 £210.00 INC VAT £175.00 EX VAT Fork Stanchion Kaifa SUA87887 Fits Breva 750, V7 Classic, V7 Special, V7 Cafe, V7 Racer, Nevada 750 Classic (2004-2008) Dimensions: 40mm OD Chromed fork stanchion for Kaifa fork Use fork seal SUA88788 with this stanchion This part is available by special order, request a quote 887887 MG887887 £228.00 INC VAT £190.00 EX VAT Fork Upgrade Fully Adjustable Damper and Spring Kit SUA36010 Fits V9 Bobber, V9 Roamer Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.
The suspension on the V9 models is notoriously cheap, these shocks are an excellent suspension upgrade which will transform your V9. Fully adjustable damping and preload allows you to get your bike handling as it should.
Combine a pair of Hagon Nitro R rear shocks to transform the handling of your V9.
- Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
-
- Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
- Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
- Anti-cavitation valve sets.
- All internal and external Aluminium components are supplied with oxidation surface treatment.
- No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
- Supplied with specific oil (Motorex Fork Oil)
Adjustments:
- Spring preload unit, with specific reference marks
- Rebound unit with specific clicks
- Compression unit with specific clicks
This part is available by special order, request a quote £765.00 INC VAT £637.50 EX VAT Kaifa Fork Upgrade Fully Adjustable Damper and Spring Kit SUA35010 Fits V7 Classic, V7 Racer, V7 Cafe, V7 Special, V7 II ALL, V7 III ALL, V7 850 ALL Complete bespoke replacement Matris damper and spring assembly for Kaifa forks. This fork upgrade completely replaces your budget Kaifa fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.
These shocks are an excellent suspension upgrade which will transform your V7. Fully adjustable damping and preload allows you to get your bike handling as it should.
Combine a pair of Hagon Nitro R rear shocks to transform the handling of your V7.
This kit is not suitable for Marzocchi forks (Mupo make a kit for these).
- Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
-
- Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
- Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
- Anti-cavitation valve sets.
- All internal and external Aluminium components are supplied with oxidation surface treatment.
- No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
- Supplied with specific oil (Motorex Fork Oil)
Adjustments:
- Spring preload unit, with specific reference marks
- Rebound unit with specific clicks
- Compression unit with specific clicks
This part is available by special order, request a quote £765.00 INC VAT £637.50 EX VAT Fork Upgrade Fully Adjustable Damper and Spring Kit SUA15010 Fits Norge 1200 (2v/cyl) Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.
These shocks are an excellent suspension upgrade which will transform your Norge. Fully adjustable damping and preload allows you to get your bike handling as it should. - Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
-
- Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
- Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
- Anti-cavitation valve sets.
- All internal and external Aluminium components are supplied with oxidation surface treatment.
- No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
- Supplied with specific oil (Motorex Fork Oil)
Adjustments:
- Spring preload unit, with specific reference marks
- Rebound unit with specific clicks
- Compression unit with specific clicks
This part is available by special order, request a quote £765.00 INC VAT £637.50 EX VAT Fork Upgrade Fully Adjustable Damper and Spring Kit SUA15011 Fits Norge 1200 (4 valves per cylinder) Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.
These shocks are an excellent suspension upgrade which will transform your Norge. Fully adjustable damping and preload allows you to get your bike handling as it should. - Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
-
- Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
- Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
- Anti-cavitation valve sets.
- All internal and external Aluminium components are supplied with oxidation surface treatment.
- No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
- Supplied with specific oil (Motorex Fork Oil)
Adjustments:
- Spring preload unit, with specific reference marks
- Rebound unit with specific clicks
- Compression unit with specific clicks
This part is available by special order, request a quote £765.00 INC VAT £637.50 EX VAT Page 10 of 13
|